You can also nd the serial number ID label on the physical switch or component. This opon is helpful
in either of these instances:
• You do not have access to the CLI.
• The serial number does not appear in the command output.
NOTE: If you want to nd the serial number on the physical switch component, you will need to
remove the component from the switch chassis.
List the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the CLI command show chassis
hardware extensive.
The following output lists the switch components and serial numbers for an EX4100 switch.
show chassis hardware extensive
Hardware inventory:
Item Version Part number Serial number Description
Chassis FA1422AN0045 EX4100-48P
Jedec Code: 0x0000 EEPROM Version: 0x00
S/N: FA1422AN0045
Assembly ID: 0xf000 Assembly Version: 00.00
Date: 00-00-0000 Assembly Flags: 0x00
Board Information Record:
Address 0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I2C Hex Data:
Address 0x00: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
Address 0x10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x20: 46 41 31 34 32 32 41 4e 30 30 34 35 00 00 00 00
Address 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Pseudo CB 0
Routing Engine 0 BUILTIN BUILTIN RE-EX4100-48P
Jedec Code: 0x7fb0 EEPROM Version: 0x02
P/N: BUILTIN S/N: BUILTIN
Assembly ID: 0xf010 Assembly Version: 01.04
Date: 04-13-2022 Assembly Flags: 0x00
215
To Next Page
Loading...
Need help?
General
