Juniper EX4100 User Manual

Table 2: CLI Equivalents of Terms Used in the Documentaon for EX4100 and EX4100-F Switches
(Connued)
Hardware
Item (CLI)
Descripon (CLI) Value Item In Documentaon Addional
Informaon
4x1G/10G
SFP/SFP+
Xcvr ( n ) Abbreviated name
of the transceiver
n is a value equivalent
to the number of the
port in which the
transceiver is installed.
Opcal transceivers "Pluggable
Transceivers and
Cables Supported on
EX4100 and
EX4100-F Switches"
on page 101.
Power
supply ( n )
One of the
following:
• JPSU-920W-
AC-AFO
• JPSU-150W-
AC-AFO
• JPSU-150W-
DC-AFO
•
JPSU-150W-
AC-AFI
•
JPSU-850W-
AC-AFO
•
JPSU-90W-AC-
AFO
• JPSU-65W-AC-
AFO
• JPSU-450W-
AC-AFO
n has a value 0 or 1,
corresponding to the
power supply slot
number.
AC power supply or
DC power supply
• "AC Power
Supply in
EX4100 and
EX4100-F
Switches" on
page 68
• "DC Power
Supply in
EX4100
Switches" on
page 78
35

Juniper EX4100 Specifications

General

Model	EX4100
Category	Switch
Layer	Layer 2/3
Power Consumption	Varies by model and configuration
PoE	Optional
Management	Web UI, CLI, SNMP
Operating Temperature	0°C to 45°C
Input Voltage	100-240V AC
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing
DC Power Input	-48V DC
JUNOS OS	Yes
Security Features	ACLs
Layer 2 Features	VLAN, RSTP, MSTP, LACP
Layer 3 Features	Static routing, OSPF
QoS	8 queues per port