Juniper EX4500 Series

the switch is completely removed to avoid electric shock. To disconnect power,
unplug all power cords (one for each power supply).
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
Related Topics ■ General Safety Guidelines and Warnings for EX Series Switches on page 145
■ General Electrical Safety Guidelines and Warnings for EX Series Switches on
page 173
■ Multiple Power Supplies Disconnection Warning for EX Series Switches on
page 178
■ Connecting AC Power to an EX2200 Switch
■ Connecting AC Power to an EX3200 or EX4200 Switch
■ Connecting AC Power to an EX4500 Switch on page 89
■ Connecting AC Power to an EX8200 Switch
AC Power Disconnection Warning for EX Series Switches
WARNING: Before working on the switch or near power supplies, unplug all the
power cords from an AC switch.
Waarschuwing Voordat u aan een frame of in de nabijheid van voedingen werkt,
dient u bij wisselstroom toestellen de stekker van het netsnoer uit het stopcontact
te halen.
Varoitus Kytke irti vaihtovirtalaitteiden virtajohto, ennen kuin teet mitään
asennuspohjalle tai työskentelet virtalähteiden läheisyydessä.
Attention Avant de travailler sur un châssis ou à proximité d'une alimentation
électrique, débrancher le cordon d'alimentation des unités en courant alternatif.
Warnung Bevor Sie an einem Chassis oder in der Nähe von Netzgeräten arbeiten,
ziehen Sie bei Wechselstromeinheiten das Netzkabel ab bzw.
AC Power Disconnection Warning for EX Series Switches ■ 177
Chapter 19: Power and Electrical Safety Information