78
AUDIO Menu screen
Item Setting Description
AUDIO MODE
A.OUT AT
SEARCH
AUDIO INPUT
SEL
AUDIO OUT
LEV
V. FADE
PAGE BACK
48 K
32 K
OFF
ON
XLR
RCA
–12 dB
–20 dB
OFF
ON
For selecting the audio sampling frequency for recording.
48 K : Records at 48 kHz. It records in the 2-channel
stereo mode. No audio dubbing allowed.
32 K : Records at 32 kHz. It records in the 4-channel
mode. To perform audio dubbing on CH3 and CH4
later, use this setting.
Memo
Setting of this item is not required for DV signal input.
For enabling/disabling audio output from this AUDIO OUT termi-
nal during searches.
OFF : Output off.
ON : Output on.
Use this setting when the XLRIN board SA-X61U (sold separately)
is installed. For selecting the audio input terminal.
XLR : Audio input terminal of SA-X61U
RCA : AUDIO INPUT terminal of the unit
For selecting the level for playback audio output.
–12 dB : Select here to reduce the analog sound output
level. It will be reduced by 8 dB.
–20 dB : Usually, this setting is used.
For enabling/disabling the V.Fade function, which reduces sound
noise in playback that is produced at jointed parts of recording.
OFF : V. FADE function disabled.
ON : V. FADE function enabled.
For returning to the TOP MENU screen.
MENU SCREENS
– Description of the Menu screens – (continued)
DV6000U_72-104_Eng.p65e 06/03/03, 11:41 PM78
To Next Page
Loading...
