JVC Everio GZ-HM320 - Setting Backlight Compensation; Setting Metering Area

Setting Backlight Compensation
You can correct the image when the subject appears too dark due to
backlight.
1
Touch D to display the menu.
.
2
Select “MANUAL SETTING” and touch C.
.
3
Select “BACKLIGHT COMP.” and touch C.
.
4
Select “ON” and touch C.
.
Setting Metering Area
You can set the brightness of a specified area as the standard.
1
Touch D to display the menu.
.
2
Select “MANUAL SETTING” and touch C.
.
3
Select “METERING AREA/ TYPE” and touch C.
.
4
Select “SPOT” and touch C.
.
.
.
●
When “SPOT” is selected, select the position of the spot frame by
touching the operation buttons "E"/"F".
After selecting, touch C to confirm.
Recording
28