Kaba Access manager 92 32 User Manual

Product Description Technical Manual
10 04045524 - 08/2016 Kaba access manager 92 32
3 Product Description
3.1 Overview
The Kaba access manager 92 32 is designed specifically for access control of an indi-
vidual door (access/exit).
This is why the device is installed in secure indoor locations near the access. The de-
vice is designed for direct mounting on the wall. However, it can also be mounted in
suspended ceilings, wall recesses etc.
Up to two registration units can be connected directly to the access manager. A reg-
istration unit allows contact-free reading and writing of RFID media in LEGIC technol-
ogy.
Communication with the superior Internet platform takes place via an Ethernet inter-
face 10BASE-T/100BASE-TX/1000BASE-T.
Power is supplied over PoE (Power over Ethernet). As an alternative the power supply
can also be performed via an external 24 V DC power supply unit.
For control and sensors of the door management, the device has 4 inputs and 3 out-
puts.
3.2 Areas of application
Access control
Based on various criteria, the access manager checks whether a booking made on a
registration unit is authorized or not.
Door management
• Door activation
• Monitoring of door opening
• Monitoring of door opening time
• Access monitoring
Alarm Management
The access manager reports irregularities in access control or door management to
the Internet platform.

Kaba Access manager 92 32 Specifications

General

Brand	Kaba
Model	Access manager 92 32
Category	Card Reader
Language	English