Kaba Access manager 92 32 User Manual

Technical Manual Product Description
1504045524 - 08/2016Kaba access manager 92 32
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux ap-
pareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
RoHS This device complies with the regulations of the Directive 2011/65/EU of the Euro-
pean Parliament and of the Council of June 8, 2011, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
In addition, the product also conforms to the following standards:
UL 60950-1
UL 294, security performance level 1
The original Declaration of Conformity can be downloaded from
www.kaba.com/conformity in PDF format.
3.5 Labeling
The identification plate is located on the rear of the device.
The identification plate contains:
• Device name
• Item number
• Serial number
• Connection data (power supply)
• CE marking
• WEEE labeling acc. to DIN EN 50419
QR code (QRC)
In addition, an adhesive label with a QRC is located on the device. The QRC contains
the serial number of the device for identification. It is used to put the device into op-
eration in its designated network.

Kaba Access manager 92 32 Specifications

General

Brand	Kaba
Model	Access manager 92 32
Category	Card Reader
Language	English