6.7 Options
6.7.1 Option H1
Anchoring the machine
➤ Use appropriate fixing bolts to anchor the machine.
Further information Details of the fixing holes are contained in the dimensional drawing in chapter 13.3.
6.7.2 Option W1
Connecting the external heat recovery system
An unsuitable heat exchanger or incorrect installation may influence the cooling oil circuit
within the compressor. Damage to the machine will follow.
➤ Consult KAESER on a suitable heat exchanger and have KAESER Service do the installation.
6 Installation
6.7 Options
44
Service Manual Screw Compressor
ASK T SIGMA CONTROL BASIC 9_5717 20 E
To Next Page
Loading...
