KAESER ASK T series - Acknowledging Alarm and Warning Messages; Fig. 18 Acknowledging Messages

8.4 Acknowledging alarm and warning messages
Fig. 18 Acknowledging messages
10 Warning LED (yellow)
11 Alarm LED (red)
12 «Acknowledge» key
Alarm message
Messages are displayed on the "new value" principle:
■ Message received: LED flashes
■ Message acknowledged: LED lights
■ Message gone: LED extinguished
or
■ Message received: LED flashes
■ Message gone: LED flashes
■ Message reset: LED extinguished
➤ Rectify the fault and acknowledge the message with the «acknowledge» key.
alarm LED extinguishes.
The machine is now ready to start again.
Warning message
■ Message coming: LED flashes
■ Message gone: LED extinguished
➤ Rectify fault or carry out maintenance.
The Warning LED extinguishes as soon as the cause of the warning is rectified.
8 Operation
8.4 Acknowledging alarm and warning messages
9_5717 20 E
Service Manual Screw Compressor
ASK T SIGMA CONTROL BASIC
55