Kappa Flight Eye FE320 - Page 36

36
NOTICE
Damage to the CSU due to using metal tools!
If you use a metal-tool to remove the sealing ring you can damage the surface of the
channel that seals the system.
 Use only a non-metal tool to remove the sealing-ring.
Step
Procedure
Figure
2
Put the camera head on a
stable underground and
make sure that the camera
cannot move or fall down.
Use a plastic or wooden
extraction tool (for example:
toothpick) to remove the
sealing-ring (1).
3
Clean the sealing-ring notch
with soft cleaning fluid to
remove sealing-grease.