EN
762.885 Z05 2012 coolcept_fleX, coolcept³_fleX 15
4.10 Connection peculiarities
When "Italy" has been set in the country selection, the "COM1" or "COM2" connection
must be wired in accordance with the CEI 0-21 standard. For a detailed description refer to
the appendix (only in the Italian version of these instructions) or the document "Technical
Information" in the download area on the Steca website.
4.11 Data display
The following data are shown on the display:
• voltage and current generated by the PV generator
• power and current fed into the public grid
• current voltage and frequency of the public grid
• generated energy yields on a daily, monthly and annual basis
• current error states and notes
• information on the version of the device
4.11.1 Data storage
In the internal memory (EEPROM), event messages and energy yields are stored with the
date. The energy yields are stored for the specified period.
Storage resolution/period
10-minutes values 31 days
Daily values 13 months
Monthly values 30 years
Annual values 30 years
Total yield Permanent
To Next Page
Loading...