EN
32 762.885 Z05 2012 coolcept_fleX, coolcept³_fleX
9.1 Event message type
Information
The inverter has detected an error which does not impair feed-in. There is no need for the
user to intervene.
Warning
The inverter has detected an error which may cause reduced yields. It is recommended to
eliminate the cause of error.
Error
The inverter has detected a serious error. The inverter does not feed in as long as the error
is present.
Inform the installer.
For a detailed description of the individual event messages and the fault
message by means of an acoustic alarm, the integrated web server and an
Internet portal refer to the document "Technical Information" in the download
area on the Steca website.
10 Maintenance and care
DANGER
Voltage.
There is a risk of death by electrocution.
►
Only clean device with a slightly moist cloth.
►
Any repair work may only be carried out by the manufacturer's customer
service department.
Except for the care of its exterior, the inverter is maintenance free.
• Remove dust with compressed air (max. 2 bar).
• Remove soiling with a slightly damp cloth (use clear water). In case of heavy soiling,
use a cleaning agent without solvents or disinfectants, that does not contain any granu-
lar or sharp-edged substances.
11 Disposal
►
Do not dispose of the inverter with household waste.
►
Return the inverter to customer service with the note: "For disposal".
►
The device packaging consists of recyclable materials.
To Next Page
Loading...