EN
762.885 Z05 2012 coolcept_fleX, coolcept³_fleX 31
8.4 Navigating the menu structure
• To go from one "Output power" status display to the other status displays: scroll through
the status displays with the "" operating buttons.
• To go from the "Output power" status display to the main menu: press "SET".
• To go to the other menu items within the main menu: scroll through the menu with the
"" operating buttons.
• To go from a menu item to a submenu: press "SET".
• To go to other menu items within a submenu: scroll through the submenu with the ""
operating buttons.
• To return from any menu to the "Output power" status display: press and hold "ESC" for
1 second.
For a detailed description of the individual menu items refer to the document
"Technical Information" in the download area on the Steca website.
9 Faults
Event messages indicate faults and can be signalled by means of an acoustic alarm, the
integrated web server, an Internet portal and the display in the inverter display. In the event
of a fault, the display flashes red and an event message describes the cause of the fault. In
addition, the malfunction can be signalled by an acoustic alarm from the inverter.
Event messages contain the following information:
• Event message type
• Date/time of the event message
• Note on the status of the event:
Active = fault is still present
Date/time = fault was eliminated at the indicated time
• Cause of the fault
• Consecutive number / total number in the list of events
• Acknowledged / not acknowledged fault
Events are acknowledged by pressing the "ESC" or "" operating buttons. The fault,
however, persists until the cause for the fault has been remedied.
To Next Page
Loading...