EN
762.885 Z05 2012 coolcept_fleX, coolcept³_fleX 5
1 General information
These instructions contain information for the safe use of the inverter and all the infor-
mation that a specialist needs for setting up, and the operator needs for operating the in-
verter.
The coolcept fleX and coolcept³ fleX inverters are available in various models for different
power classes. The StecaGrid #### inverters are suitable for the connection to one PV
generator. The StecaGrid ####_2 inverters are suitable for the connection to two PV gen-
erators.
The following models of the single-phase coolcept fleX inverters are available:
The following models of the three-phase coolcept³ fleX inverters are available:
1.1 Accessories
Ask for possible accessories, options, suitable PV generators, and installation material at
the installer's or at KATEK.
1.2 Documents
Data sheets, drawings, country tables, and certificates are available in the download area
of the Steca homepage.
1.3 Liability, warranty
The conditions for the device are available for downloading on the Steca homepage:
https://www.steca.com/PV_on_Grid_warranty-conditions.
1.4 Contact
In the event of complaints or faults, please contact your local dealer, where you purchased
the product. He will assist you in all respects.
Contact in Europe:
sse 1
any
: www.steca.com
customerservice@stecasolar.com
1.5 Monitoring portal
Steca's monitoring portal sunCloud offers online monitoring of the PV system at no charge:
https://steca.powerdoo.com
To Next Page
Loading...