What does Event E8 mean on KaVo Medical Equipment?
Event E8 on your KaVo Medical Equipment means that saved data or settings have been reset to the starting value. Confirm the message and check or correct the program settings.
What does Event E14 mean on KaVo Medical Equipment?
Event E14 on your KaVo Medical Equipment indicates a motor overload. Relieve the motor of its load, then stop and start it using the foot control.
General| Motor Type | Brushless |
|---|---|
| Torque | 3.5 Ncm |
| Autoclavable | Yes |
| Type | Electric motor |
| Speed | Up to 40, 000 rpm |
| Control | Control unit with display |
| Connection | ISO 3964 |
| Material | Stainless steel |
| Compatibility | Compatible with most dental units with electric motor connection |
Read instructions before first startup to avoid misuse and prevent damage.
Measures to prevent infection risks from contaminated medical devices.
Precautions regarding the use of the product in areas with explosion risks.
Ensuring product's technical condition and performing user checks before operation.
Preventing liquid ingress to avoid electric shock and injury.
Guidelines for using approved accessories and combining with other equipment safely.
User training and qualification requirements for operating the device.
Defines the purpose and application of the ELECTROmatic in dental treatments.
Procedure for calibrating the foot control for optimal operation.
Instructions on how to adjust various device settings like speed, LUX, and key tones.
Steps to start the motor and reach the set maximum speed.
Instructions on how to adjust the amount of spray water for cooling.
How to change and save speed settings using the control panel or foot control.
Explanation of SAFEdrive for preventing overheating and burn injuries.
Instructions on how to enable or disable the SAFEdrive function.
Guidance on using SAFEdrive and handling alerts or errors.
Procedures for cleaning the unit, including preparation and manual methods.
Guidelines and recommended products for disinfecting the unit and spray water.
Troubleshooting steps for issues with spray water delivery or regulation.
Diagnosing issues when the device display is off or LED is not flashing.
Troubleshooting device issues when the control panel LED flashes.
Resolving problems where the maximum motor speed is not achieved.
Troubleshooting steps for a sluggish motor or handpiece performance.
Resolving problems with the LUX light being red or not turning on.
Actions to take when the SAFEdrive icon flashes yellow, indicating motor overload.
Troubleshooting SAFEdrive error status where the motor stops automatically.
Interpreting and resolving specific event error codes displayed by the unit.
Steps to resolve general internal system errors.
To Next Page