KEB COMBIVERT F5 BASIC - Page 323

11
25
Bedienung
11
KEB COMBIVERT F5
Chapter Section Page
10.04.02
DateName:Basis
© KEB Antriebstechnik, 2002
All rights reserved
Networks
Bus Parameters
Preadjustment of the setpoint speed in the range of ±16000 rpm. The source of
direction of rotation is determined via oP.1, just as with the other absolute setpoint
sources. The setpoint source oP.0 must be adjusted to „5“ via Sy.52 for setpoint
setting.
11.2.8 Speed Setting via
Bus
Setpoint speed Sy.52
Actual speed Sy.53
Via this parameter the current actual speed can be read out in rpm. The direction of
rotation is signalled by the sign.
The status word high is bit-coded and structured as follows.
Bit Function Beschreibung
16 I1 Status ru.22 Bit 4
17 I2 Status ru.22 Bit 5
18 I3 Status ru.22 Bit 6
19 I4 Status ru.22 Bit 7
20 IA Status ru.22 Bit 8
21 IB Status ru.22 Bit 9
22 IC Status ru.22 Bit 10
23 ID Status ru.22 Bit 11
24 O1 Status ru.25 Bit 0
25 O2 Status ru.25 Bit 1
26 R1 Status ru.25 Bit 2
27 R2 Status ru.25 Bit 3
28 OA Status ru.25 Bit 4
29 OB Status ru.25 Bit 5
30 OC Status ru.25 Bit 6
31 OD Status ru.25 Bit 7
The status word long (32 Bit) consists of Sy.51 and Sy.42.
Status word high Sy.42
Status word long Sy.44