KEB COMBIVERT G6 Programming Manual

46
Generalcontrolcardparameters(operatorfunctionality)
Parameter Id-Text Name CANSDOIndex
os04 Diag error count 0x2084
Subindex 0
Object type Variable
Data length unsigned Byte
Access Read write
Meaning Speciesthenumberofoccurrederrorsonthediagnosticinterface.
Coding 0…255
Parameter Id-Text Name CANSDOIndex
os05 Diag response delay time 0x2085
Subindex 0
Object type Variable
Data length unsigned Byte
Access Read write
Meaning Adjusts the minimum response delay time for inquiries over the diag-
nostic interface.
Coding 0…126 ms
Parameter Id-Text Name CANSDOIndex
os06 Diag baud rate 0x2086
Subindex 0
Object type Variable
Data length unsigned Byte
Access Read write
Meaning Setting the transmission speed on the diagnostic interface.
Coding
0 1.2 Kbit/s
5 38.4 Kbit/s
1 2.4 Kbit/s
6 55.5 Kbit/s
2 4.8 Kbit/s
7 57.6 Kbit/s
3 9.6 Kbit/s
8 100 kbit/s
4 19.2 Kbit/s
Standard 5
Parameter Id-Text Name CANSDOIndex
os07 node ID 0x2087
Subindex 0
Object type Variable
Data length unsigned Byte
Access Read write
Meaning Thisparameterspeciestheinverteraddressforthediagnosticinter-
face (DIN 66019). The parameter is a mapping of the system param-
eter Sy06. If the inverter address is changed via bus, then there is no
longer access.
Coding 0…239

KEB COMBIVERT G6 Specifications

General

Brand	KEB
Model	COMBIVERT G6
Category	DC Drives
Language	English