GB - 6
Preface
Tests can only be done within the application by the machine manufacturer. They must be
repeated, even if only parts of hardware, software or the unit adjustment are modied.
Unauthorised opening and tampering may lead to bodily injury and property damage and
may entail the loss of warranty rights. Original spare parts and authorized accessories by the
manufacturer serve as security. The use of other parts excludes liability for the consequences
arising out of.
The suspension of liability is especially valid also for operation interruption loss, loss of prot,
data loss or other damages. This is also valid, if we referred rst to the possibility of such
damages.
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
1.4 Copyright
The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety. All rights reserved.
KEB
®
, COMBIVERT
®
, COMBICONTROL
®
and COMBIVIS
®
are registered trademarks of Karl
E. Brinkmann GmbH.
Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their re-
spective owners and are listed in the footnote on the rst occurrence.
When creating our documents we pay attention with the utmost care to the rights of third par-
ties. Should we have not marked a trademark or breach a copyright, please inform us in order
to have the possibility of remedy.
1.5 Speciedapplication
The COMBIVERT G6 serves exclusively for the control and regulation of three-phase motors.
The operation of other electric consumers is prohibited and can lead to the destruction of the
unit. Frequency inverters are components which are intended for the installation in electric
systems or machines.
The used semiconductors and components of KEB are developed and dimensioned for the
use in industrial products. If the KEB COMBIVERT F5 is used in machines, which work under
exceptional conditions or if essential functions, life-supporting measures or an extraordinary
safety step must be fullled, the necessary reliability and security must be ensured by the ma-
chine builder. The operation of our products outside the indicated limit values of the technical
data leads to the loss of any liability claims.
1.6 Product description
The product family COMBIVERT G6 has been developed for the universal use at open-loop
three-phase drives. The COMBIVERT G6 can be operated open-loop or encoderless speed
or torque-controlled. The units are equipped with an integrated EMC lter.
To Next Page
Loading...
Need help?
General