Handheld Terminal KeTop - Specific Operating Instructions
User's Manual, version: 3.1 / material no.: 57448 105
© KEBA 2006
Transfer via network connection by SMB acces from PC to KeTop
This kind of SMB access is only possible with Windows XP Professional
and some Versions of Windows 2000.
For general information see the ", section "Ethernet" in the chapter "Con-
nection”.
The KeTop must have a valid Ethernet address.
In case there is no DHCP-server in the network, the IP-address can be set
via "Start Î Settings Î Control Panel Î Network and Dial-up Connections
Î CELAN1... Î Properties..."
To save the IP-address go to "Start Î Programs Î KETOP Î Registry
Backup" and restart the KeTop.
(The Ethernet-connection can be checked with "Ping".)
Then enter the IP-address of the KeTop in the address line of the Windows
Explorer at the PC. (e.g.: \\192.168.30.107)
The PC now has full access to the directory structure at the KeTop so that
all required files can be copied from the PC to "\ipsm" at the KeTop.
Transfer via network connection by access from KeTop to the PC
For general information see the section "Ethernet" in the chapter "Connec-
tion”.
The KeTop must have a valid Ethernet address.
In case there is no DHCP-server in the network, the IP-address can be set
via "Start Î Settings Î Control Panel Î Network and Dial-up Connections
Î CELAN1... Î Properties..."
To save the IP-address go to "Start Î Programs Î KETOP Î Registry
Backup" and restart the KeTop.
(The Ethernet-connection can be checked with "Ping".)
Then enter the IP-address of the KeTop in the address line of the Windows
Explorer at the PC. (e.g.: \\192.168.30.107)
After start-up of the KeTop start the Windows Explorer at the KeTop. (Start
Î Programs Î Windows Explorer)
The shared directory of the PC can new be addressed in the address line of
the Windows Explorer at KeTop with "\\<pcname>\<share name>". (e.g.:
\\tkg007\temp)
The directory at the PC must be shared and a user with the necessary
rights to access must exist.
To Next Page
Loading...