Handheld Terminal Safety Precautions
User's Manual, version: 3.1 / material no.: 57448 13
© KEBA 2006
2 Safety Precautions
The device was developed, manufactured, tested and documented in ac-
cordance with the applicable safety standards. If you follow the instructions
regarding safety and use as described in this manual (see chap. „
Intended
Use of the Handheld Terminal“), the product will, in the normal case, nei-
ther cause personal injury nor damage to machinery and equipment.
The instructions contained in this manual must be precisely followed in all
circumstances. Failure to do so could result in the creation of potential
sources of danger or the disabling of safety features integrated in the
handheld terminal.
Apart from the safety instructions given in this manual, the safety precau-
tions and accident prevention measures appropriate to the situation in
question must also be observed.
WARNING
!
• For the right projecting of the Handheld Terminal the manufactorer must enforce
a hazard and risk analysis. The following safety aspects must be considered:
- Right cable length for limitation of workspace.
- Is an emergency stop button necessary and permissible?
- Is the safety category for the application sufficient
?
• The device may be operated in faultless condition only and the operating in-
structions must be observed.
• The operator must have a sufficient educational level and must know details of
intended use described in the user’s manual.
• The safety advices in the following chapters must be considered absolutely.
• Further informations to safety and EMC are included in chapt. „
CE Conformity,
Directives and Standards“. They must be considered absolutely.
To Next Page
Loading...