Keba KeTop T100 - Software; Windows CE

Membrane Keypad KeTop T100
44 User's Manual, version: 3.1 / material no.: 57448
© KEBA 2006
Numbering of LEDs
This chapter describes the numbering of the keyboard LEDs and push-
button LEDs.
The LED number is needed for activating the LED.
A LED can be activated in two ways:
z Via KeTop API design
(see chapter „Fehler! Verweisquelle konnte nicht gefunden werden.“
-> „
KtpSetKeyboardLed“ on page 57)
z Via KVC – KEBA Virtual Channel
(see chapter „
Example: Interface on Server“ on page 84)
Illuminated
push button, left
(LED No. = 7)
Key switch/
selector switch
Option:
Illuminated
push button
(LED No. = 6)
Illuminated
push button, right
(LED No. = 5)
KETOP
R
u
n
E
r
r
o
r
Run-LED, green
(LED No. = 3)
Error-LED, red
(LED No. = 4)
e.g. general membrane keypad:
Numbering of LEDs on KeTop