KeTop - Specific Operating Instructions KeTop T100
96 User's Manual, version: 3.1 / material no.: 57448
© KEBA 2006
KeTop Configuration Tool (ConfigTool)
The ConfigTool is used to calibrate the operating elements, to control the
functionality of the operating elements, to select the Ethernet interface and
to set start-up functions.
To activate the tool, select the following item:
Start -> Programs -> KeTop -> KeTop Configuration Tool
(or by double-clicking on the file „Configuration_Tool.exe“ in the Windows
directory).
Notice
• The appearance of the Config tool depends on the operating elements
installed in KeTop (the menus for override potentiometer, joystick and
handwheel are only displayed when the operating elements are in-
stalled in the device).
After carrying out modifications on the configuration and quitting the pro-
gram, you can save all modifications in the registry. A window with the fol-
lowing message and options appears:
Data has changed! Do you want to write the registry to the flash? Yes/No
With „No“, the settings are contained in the DRAM and will not be stored
therefore. They will get lost when the KeTop is turned off.
„Yes“ saves the calibration in the flash. The settings are preserved after a
restart of the device. The device is blocked during the saving procedure
(takes approx. 10 s).
To Next Page
Loading...