Handheld Terminal Accessories
User's Manual, version: 3.1 / material no.: 57448 121
© KEBA 2006
Intermediate Cable KeTop ICxxx
The KeTop intermediate cable is used to the connect the connection box and the Conin-
vers jack in the wall of the control cabinet. Cables with the following lengths are available:
z KeTop IC020 (2 m)
z KeTop IC040 (4 m)
Description of signal
K1,
17-pin female
connector,
pin No.:
Intermediate
cable
ICxxx,
color of wires
K2,
17-pin male
connector,
pin No.:
Enabling switch, circuit 1, pos. 7 brown <- 7
Enabling switch, circuit 1, neg. 8 yellow <- 8
Enabling switch, circuit 2, pos. 12 green <- 12
Enabling switch, circuit 2, neg. 17 grey <- 17
Not used 10 - 10
24 V DC (+/- 10%) 1 red <- 1
Not used 9 - 9
Emergency stop, circuit 1 3 green/brown <- 3
Emergency stop, circuit 1 GND 4 white/grey <- 4
Emergency stop, circuit 2 5 grey/pink <- 5
Emergency stop, circuit 2 GND 6 red/blue <- 6
GND_IN 2 black <- 2
TD+ (tansmit) 13 blue <- 13
TD- (transmit) 14 white <- 14
RD+ (receive) 15 orange <- 15
RD- (receive) 16 red <- 16
Powerfail 11 violet <- 11
Shielded signals: TD+, TD-, RD+, RD-
11
10
9
8
7
6
5
4
3
2
1
12
16
15
14
13
17
12
8
9
6
7
5
17
15
16
3
4
14
13
11
10
1
2
Crimp contacts:
4x female contacts DSUB 0.08-0.22 mm²
AMP: 5-166052-1
pin 13 to 16 according to the table
13x female contacts DSUB 0.2-0.56 mm²
AMP: 66504-3
other pins according to the table
K1, 17-pin coninvers jack (female)
2 or 4 m /
6.56 or 13.12 ft
K2
17-pin coninvers jack (male)
RC-17P1N8A80GK,
view from
connector side:
K1
17-pin coninvers jack (female)
RC-17S1N8AQ0GK,
view from
connector side:
Crimp contacts:
4x male contacts DSUB 0.08-0.22 mm²
AMP: 5-166054-1
pin 13 to 16 according to the table
13x male contacts DSUB 0.2-0.56 mm²
AMP: 5-166053-1
other pins according to the table
Dust cover
K2, 17-pin coninvers jack (male)
Intermediate cable KeTop ICxxx
To Next Page
Loading...