Keba KeTop T100 - 8 Ketop - Specific Operating Instructions; Setting of Date and Time

Handheld Terminal KeTop - Specific Operating Instructions
User's Manual, version: 3.1 / material no.: 57448 95
© KEBA 2006
8 KeTop - Specific Operating Instructions
This chapter describes the KeTop-specific settings and the differences to
standard Windows CE devices.
Notice
• The date and the time are not stored in the KeTop and, if needed, must
be set anew after turning off/on. The date and the time may be very im-
portant for the log data for example.
Notice
• At settings that have not been made with the ConfigTool, the modifica-
tions must be saved as follows:
Start -> Programs -> KeTop -> Registry Backup
(or in the explorer with the command „\windows\regflush.exe“)
Setting of Date and Time
During start-up the KeTop shows automatically the window for setting date
and time:
Should the window for date and time not be shown, the checkbox has to be
deactivated. This must be saved in the registry ("Start -> Programs -> Ke-
Top -> Registry Backup").
The KeTop is not equipped with a real time clock. So, if you use the time it
must be set during each star-up.