Handheld Terminal Accessories
User's Manual, version: 3.1 / material no.: 57448 117
© KEBA 2006
For wall mounting, we recommend the following screws and materials:
z Chipboard screw: ∅ 4 x 40mm
Head form: flat head
Max. head diameter:
∅ 9mm
z Recommended rawlplug: ∅ 6 x 30mm
DIN Rail Holder Mounting Set KeTop DR200
The DIN rail holder KeTop DR200 is available as accessory and will be
mounted on the rearside of a KeTop CB2xx gatewaybox. So the gate-
waybox can be easily snapped onto a DIN rail.
DIN Rail Holder Mounting Set DIN Rail Holder fixed on the rear side of the gateway-
box
DIN Rail Holder Mounting Set for gatewaybox
To Next Page
Loading...