Keba KeTop T100 - Page 59

Handheld Terminal Software
User's Manual, version: 3.1 / material no.: 57448 57
© KEBA 2006
KtpSetPotiCalibData
Declaration
UINT8 KtpSetPotiCalibData(/*in*/ UINT16 rawMin, UINT16
rawMax, UINT16 calibRange);
Description
Calibration of override potentiometer.
This function may only be called if a override potentiometer is installed
on the device. If no override potentiometer is installed, the value of the
components are undefined.
Arguments
UINT16 rawMin: value for smallest raw value
UINT16 rawMax: maximum raw value
UINT16 calibRange: maximum range of overridepoti
KtpGetWheelValue
Declaration
UINT8 KtpGetWheelValue(/*out*/UINT16 *p_val);
Description
Gets the actual value of the handwheel.
Arguments
Pointer to the variable containing the current value of the handwheel.
Remarks
This function may only be called if a handwheel is installed on the de-
vice. If no handwheel is installed, the value of the components are
undefined.
KtpSetWheelValue
Declaration
UINT8 KtpSetWheelValue(/*in*/UINT16 val);
Description
Sets the current position of the handwheel to the value transferred in
val.
Arguments
val is the value the handwheel should be set to.
Remarks
This function may only be called if a handwheel is installed on the de-
vice. If no handwheel is installed, the value of the components are
undefined.
LED Functions
Because the SxTPU2 is not equipped with LEDs, following functions are
not relevant.
KtpSetKeyboardLed
Declaration
UINT8 KtpSetKeyboardLed(/*in*/UINT8 ledNr, TLedState led-
State);
Description
Switches the set LED to the desired state.
Arguments
UINT8 ledNr: number of LED to be set.
UINT ledState: state, the LED is set to.
KtpGetKeyboardLed
Declaration
TLedState KtpGetKeyboardLed(/*in*/UINT8 ledNr);
Description
Returns the state of the desired LED.
Arguments
UINT8 ledNr: number of LED.