Handheld Terminal Software
User's Manual, version: 3.1 / material no.: 57448 81
© KEBA 2006
Events Causing the Client to Send Data
z Modification of value of override potentiometer
z Modification of handwheel value
z Modification of key status of a key
z The joystick or the space mouse reaches the 0 position.
z The joystick or space mouse leaves the 0 position.
z Data inquiry of server
With each event, the client sends to the server a data package containing
the information about the type of event as well as the current data of all op-
erating elements. If the client produces several events one after the other,
and the server cannot process all of them at once (e.g. quick rotation of
handwheel and simultaneous movement of joystick), the server will send
one message containing all events.
Events of Server
By sending a package to the client, the server can influence the status of
the LEDs on the client, set the current value of the handwheel, or request
the current values (position of joystick, handwheel and override potentiome-
ter, as well as state of keys). The server can also read the current states of
the values which can be modified by the server.
To Next Page
Loading...