System Switch/Multimeter User's Manual Section 6:
-900-01 Rev. A / August 2007 6
exit function
Use this function to terminate a script that is presently running. Available command:
exit()
format attributes
Use the format attributes to configure the output formats used by the printnumber and printbuffer
functions. These attributes can set the data format (ASCII or binary), ASCII precision (number of
digits), and binary byte order (normal or swapped).
NOTE All of the responses are ASCII data.
Available commands:
format.asciiprecision
format.byteorder
format.data
gpib attribute
Use the following attribute to set or get the GPIB address. Available command:
gpib.address
makegetter functions
Use the functions in this group to set and retrieve a value for an attribute. Available commands:
makegetter()
makesetter()
LAN commands
Use the functions and attributes in this group to set/read the LAN triggers. Available commands:
lan.applysettings()
lan.config.autonegotiate
To Next Page
Loading...
Need help?
General
