Keithley 3730

Section
2: Using the Front Panel Series 3700 System Switch/Multimeter
User's Manual
2
-2 Document Number: 3700S-900-
01 Rev. A / August 2007
Figure 2-2: Model 3706-S System Switch (no DMM)
NOTE If your model does not have a front panel, please refer to the reference manual for
information on how to change:
1. GPIB address with gpib.address command.
2. LAN configuration using LAN functions. To see current settings for LAN, see the
applicable lan.status.* commands (for example, to see the present IP address of the
Series 3700, send the following command: lan.status.ipaddress.