Keithley 3730 User Manual

Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
Specifications are subject to change without notice.
SPEC-3730 Rev. A / September 2007 Page 1 of 3
Model 3730
6x16 Matrix Specifications
96 two-pole crosspoints with column expansion relays
MATRIX CONFIGURATION: 6 row by 16 column matrix. Columns can be expanded using the backplane or
isolated by relays.
CONTACT CONFIGURATION: 2 pole form A.
CONNECTOR TYPE: Two 50 pin male D-shells.
MODEL 3730-ST SCREW TERMINAL OPTION:
#22 AWG typical wire size with .062 inch O.D. 88 conductors maximum. #16 AWG maximum wire size with
.092inch O.D. 44 conductors per card maximum.
MAXIMUM SIGNAL LEVEL: 300V DC or RMS, 1A switched (2A carry), 60W, 125VA.
COMMON MODE VOLTAGE: 300V DC or RMS between any terminal and chassis.
VOLT-HERTZ LIMIT: 8x10
7
CONTACT LIFE: > 10
5
operations at max signal level.
>10
8
operations no load.
1
6x16
2, 3
Channel Resistance
(end of contact life)
<1.0
Contact Potential
(differential)
<± 2V
Offset Current <±100pA
Isolation
Differential 10
10
,250pF
CH –CH 10
10
,75pF
Common mode 10
10
,150pF
Crosstalk CH-CH
300KHz:
1MHz:
20MHz:
<-65dB
<-55dB
<-30dB
Bandwidth 27MHz
1
Minimum signal level 10mV, 10uA
2
Connections made using 3730-ST
3
3706 mainframe with all DMM backplane relays disconnected.

Keithley 3730 Specifications

General

Brand	Keithley
Model	3730
Category	Multimeter
Language	English