Keithley 3730 User Manual

Series 3700
System Switch/Multimeter User's Manual Section 2:
Using the Front Panel
Document Number: 3700S
-900-01 Rev. A / August 2007 2-
13
OPENDETECT
Configures the state of the thermocouple or four-wire ohms open detector being used. Related
ICL command: dmm.opendetector
RANGE
Configures the range of DMM for the selected function. Related ICL command: dmm.range
REL
Opens the REL MENU for the selected DMM function. See REL key configuration (on page 2-
14).
THERMO
Selecting the THERMO menu item opens the THERMO MENU. Items contained in this menu
are as follows:
 REF JUNCTION: Allows selection of the Reference Junction to use. Available choices
are: SIMULATED, EXTERNAL, or INTERNAL. Related ICL command: dmm.refjunction
 SIMREF: Specifies the simulated reference temperature for thermocouples. Related ICL
command: dmm.simreftemperature
 THERMISTOR: Specifies the type of thermistor. Related ICL command: dmm.thermistor
 COUPLE: Specifies the thermocouple type. Related ICL command: dmm.thermocouple
 TRANSDUCER: Selects the transducer type (THERMOCOUPLE, THERMISTOR, 3RTD,
or 4RTD). Related ICL command: dmm.transducer
 THREERTD: Specifies the type of 3-wire RTD. Related ICL command: dmm.threertd
 FOURRTD: Specifies the type of 4-wire RTD. Related ICL command: dmm.fourrtd
 USER: Specifies USER type of RTD (ALPHA, BETA, DELTA, or ZERO). Related ICL
commands: dmm.rtdalpha, dmm.rtdbeta, dmm.rtddelta, dmm.rtdzero
THRESHOLD
Configures the threshold range. Related ICL command: dmm.threshold
UNITS
Configures the units for voltage and temperature measurements. Related ICL command:
dmm.units

Keithley 3730 Specifications

General

Brand	Keithley
Model	3730
Category	Multimeter
Language	English