Keithley 6517A User Manual

IEEE-488 Reference
3-50
:RESistance
:AVERage
:TYPE <name>
:TYPE?
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:ADVanced
:NTOLerance <n>
:NTOLerance?
[:STATe] <b>
[:STATe]?
:MEDian
[:STATe] <b>
[:STATe]?
:RANK <NRf>
:RANK?
:DAMPing <b>
:DAMPing?
:VSControl <name>
:VSControl?
:MSELect <name>
:MSELect?
:RESistivity
:STHickness <NRf>
:STHickness?
:FSELect <name>
:FSELect?
:M8009
:RSWitch?
:USER
:RSELect <name>
:RSELect?
:KSURface <NRf>
:KSURface?
:KVOLume <NRf>
:KVOLume?
Path to control average filter.
Select filter type (NONE, SCALar, ADVanced).
Query filter type.
Select filter type: (MOVing or REPeat).
Query filter type.
Specify filter count (1 to 100).
Query filter count.
Path to configure and control advanced filter.
Specify noise tolerance level (0 to 100%).
Query noise tolerance level.
Enable or disable digital filter.
Query state of digital filter.
Path to control median filter.
Enable or disable median filter.
Query state of median filter.
Specify range (1 to 5).
Query rank.
Enable or disable damping.
Query state of damping.
Select ohms V-Source mode (MANual or AUTO).
Query ohms V-Source mode.
Select ohms measurement type (NORMal or RESistivity).
Query ohms measurement type.
Path to configure resistivity:
Volume; specify sample thickness (0.0001 to 99.9999mm)
Query sample thickness.
Specify test fixture (M8009 or USER).
Query test fixture.
Path to query Model 8009 test fixture.
Query switch setting (surface or volume)
Path to configure user test fixture.
Specify measurement type (SURFace or VOLume)
Query measurement type.
Surface; specify K
s
(0.001 to 999.999)
Query, K
s
Volume; specify K
v
(0.001 to 999.999)
Query K
v
SCALar
(Note 3)
10
1
OFF
ON
1
OFF
MANual
NORMal
1mm
M8009
SURFace
1.000
1.000
3.18.10
3.19.12
3.19.16
3.19.17
3.19.18
Table 3-10 (Continued)
SENSe command summary
Command Description
Default
parameter SCPI Ref.

Keithley 6517A Specifications

General

Brand	Keithley
Model	6517A
Category	Measuring Instruments
Language	English