Keithley DMM6500

In this section:
Introduction .............................................................................. 5-1
Equipment required .................................................................. 5-1
Device connections .................................................................. 5-2
Measuring DCV with high accuracy ......................................... 5-3
Introduction
This example application demonstrates how to use a DMM6500 to make high-accuracy DC voltage
measurements.
This type of test is often done in metrology laboratories where high accuracy is required for calibration
and verification.
Equipment required
• One DMM6500
• One computer set up for communication with the instrument
• Two insulated banana cables
• One device or component to be tested
Section 5
Measuring DC voltage with high accuracy