6½ Digit Multimeter User's Manual Section 7:
Scanning temperature at a set time interval
DMM6500-900-01Rev. A / April 2018 7-7
scan.export("/usb1/scan24hr", scan.WRITE_AFTER_SCAN, buffer.COL_ALL)
-- Enable scan restart on power loss
scan.restart = scan.ON
-- Start the scan.
trigger.model.initiate()
waitcomplete()
-- Get the data.
printbuffer(1, defbuffer1.n, defbuffer1)
Test results
The following figures show a sample graph and final test measurement for this application.
Figure 39: DMM6500 graph of temperature measurements
Figure 40: DMM6500 final temperature measurement
To Next Page
Loading...
