Keithley SourceMeter 2612 Reference Manual

12-72 Instrument Control Library Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006 Return to Section 12 topics
smuX.measure.filter.count
X = SMU channel (a or b)
Attribute Number of measured readings to yield one filtered measurement.
Usage
count = smuX.measure.filter.count -- Reads filter count.
smuX.measure.filter.count = count -- Writes filter count.
count Set filter count from 1 to 100.
Remarks
• This attribute is the number of measurements that will be performed to yield one
filtered measurement.
•The reset function sets the filter count to 1.
Details See “Filters” in Section 6.
Also see smuX.measure.filter.enable, smuX.measure.filter.type
Example
Sets filter count for SMU A:
smua.measure.filter.count = 10
smuX.measure.filter.enable
X = SMU channel (a or b)
Attribute Enables/disables filtered measurements.
Usage
filter = smuX.measure.filter.enable -- Reads on/off state of the filter.
smuX.measure.filter.enable = filter -- Writes on/off state of the filter.
Set filter to one of the following values:
0 or smuX.FILTER_OFF Disables the filter.
1 or smuX.FILTER_ON Enables the filter.
Remarks
• This attribute enables or disables the filter.
•The reset function disables the filter.
Details See “Filters” in Section 6.
Also see smuX.measure.filter.count, smuX.measure.filter.type
Example
Enable the filter for SMU A:
smua.measure.filter.enable = smua.FILTER_ON
smuX.measure.filter.type
X = SMU channel (a or b)
Attribute Type of filter for measurements.
Usage
type = smuX.measure.filter.type -- Reads filter type.
smuX.measure.filter.type = type -- Writes filter type.
Set type to one of the following values:
0 or smuX.FILTER_MOVING_AVG Selects the moving average filter.
1 or smuX.FILTER_REPEAT_AVG Selects the repeat filter.

Keithley SourceMeter 2612 Specifications

General

Brand	Keithley
Model	SourceMeter 2612
Category	Measuring Instruments
Language	English