Series 2600 System SourceMeters Reference Manual Error and Status Messages B-3
Return to Appendix B topics 2600S-901-01 Rev. A / May 2006
Reading errors
When errors occur, the error messages will be placed in the error queue (see
“
Queues” in Appendix D ). Table B-1 lists commands associated with the error
queue (see Section 12 for more information). For example, the following
commands request the next complete error information from the error queue and
returns the message portion of the error:
errorcode, message, severity, node = errorqueue.next()
print(message)
Table B-1
Error queue commands
Error queue command Description
errorqueue.clear() Clear error queue of all errors.
errorqueue.count Number of messages in the error/event queue.
errorqueue.next() Request error message.
To Next Page
Loading...
Need help?
General
