Flexlite GX
Operating manual - EN
CONTENTS
1. General 3
2. About equipment 5
3. Installation 7
3.1 Assembling gun 8
3.2 Installing gun remote 9
3.3 Connecting gun 11
3.4 Installing and replacing wire liner 12
3.4.1 Replacing DL Chili wire liner 12
3.4.2 Replacing steel wire liner 16
3.4.3 Replacing wire liner for multi-neck 21
3.5 Trigger switch replacement 24
3.5.1 Trigger switch setting (GX series 5) – W015263 until 9/2020 25
3.5.2 Trigger switch setting (GX series 5) – W015263 since 10/2020 26
3.5.3 Trigger switch setting (GX series 5) – W022322 28
3.6 Installing and removing grip handle (optional) 30
3.7 Adjusting and tightening neck (gas-cooled models) 31
4. Operation 32
4.1 Using gun remote GXR10 (series 5) 33
4.2 Using gun remote GXR80B (series 8) 34
5. Maintenance 36
5.1 Troubleshooting 38
5.2 Disposal 40
6. Technical data 41
6.1 Technical data: Flexlite GX 200A/250A (gas-cooled) 42
6.2 Technical data: Flexlite GX 300A/350A (gas-cooled) 44
6.3 Technical data: Flexlite GX 250A/300A (water-cooled) 46
6.4 Technical data: Flexlite GX 400A (gas-cooled) 48
6.5 Technical data: Flexlite GX 300A/400A/420A (water-cooled) 50
6.6 Technical data: Flexlite GX 500A/520A (water-cooled) 52
6.7 Technical data: Flexlite GX 600A (water-cooled) 54
6.8 Technical data: Flexlite GX HD 300A (gas-cooled) 56
6.9 Technical data: Flexlite GX HD 400A (gas-cooled) 58
6.10 Component selection 60
7. Ordering codes 62
© Kemppi
2
1921390 / 2310
To Next Page
Need help?
General
