Flexlite GX
Operating manual - EN
4. OPERATION
Before using the equipment, ensure that all the necessary installation actions have been completed according to your
equipment setup and instructions.
Welding is forbidden in places where there is an immediate fire or explosion hazard!
Welding fumes may cause injury. Take care to ensure sufficient ventilation during welding and wear respiratory pro-
tection!
Always check before use that interconnecting cable, shielding gas hose, earth return lead/clamp and mains cable are
in serviceable condition. Ensure that the connectors are correctly fastened. Loose connectors can impair welding per-
formance and damage connectors.
The exact function of the gun and trigger may vary depending on your welding machine settings (e.g. 2T, 4T or Mini-
log).
To start welding, press the trigger switch.
"Using gun remote GXR10 (series 5)" on the next page
"Using gun remote GXR80B (series 8)" on page34
For more information on component selection and availability, refer to "Component selection" on page60 and "Order-
ing codes" on page62.
© Kemppi
32
1921390 / 2310
To Next Page
Loading...
Need help?
General
