Kemppi Flexlite GX Series User Manual

Flexlite GX
Operating manual - EN
3. INSTALLATION
Ensure that the welding equipment is not connected to the mains or that the welding gun is not connected to the
welding machine until the installation is complete.
Protect the equipment from rain and direct sunshine.
"Assembling gun" on the next page
"Installing gun remote" on page9
"Connecting gun" on page11
"Replacing steel wire liner" on page16
"Replacing wire liner for multi-neck" on page21
"Installing and removing grip handle (optional)" on page30
"Adjusting and tightening neck (gas-cooled models)" on page31
Before installation and use
Ensure compliance with your local and national safety requirements regarding the installation and use of high voltage
units.
Check the contents of the packages and make sure the parts are not damaged.
© Kemppi
7
1921390 / 2310

Kemppi Flexlite GX Series Specifications

General

Brand	Kemppi
Model	Flexlite GX Series
Category	Welding Accessories
Language	English