Kemppi Flexlite GX Series User Manual

Flexlite GX
Operating manual - EN
3.5 Trigger switch replacement
In normal use, the trigger switch replacement is not a frequent task. However, removing the trigger switch tem-
porarily may be necessary, for example, when using a series 5 Flexlite GX welding gun with other than Kemppi Fast-
mig equipment.
Tools needed:
TX20
1. Remove the screws holding the trigger switch in place.
2. Slide the trigger switch slightly forward (towards the gun welding end) and pull it out.
Do not use excessive force, the trigger switch is still attached with a wiring connection underneath.
© Kemppi
24
1921390 / 2310

Kemppi Flexlite GX Series Specifications

General

Brand	Kemppi
Model	Flexlite GX Series
Category	Welding Accessories
Language	English