Kemppi Flexlite GX Series User Manual

Flexlite GX
Operating manual - EN
Remote control views and operation
• Memory channel view:The memory channel is changed by pressing the +/- buttons. Long press of a +/- button
scrolls the parameter values faster. Long press of the left arrow button saves the adjusted parameters on the cur-
rently selected channel.
• Welding power view: Depending on the used welding process, wire feed speed or current is adjusted by pressing
the +/- buttons. Long press of a +/- button scrolls the parameter values faster.
• Fine tuning view: Depending on the welding process used, voltage or welding process specific parameter is fine-
tuned by pressing the +/- buttons. Long press of a +/- button scrolls the parameter values faster. Long press of the
right arrow button switches between double pulse, double process and WP switch parameter sets, if one of these
features or processes is in use.
© Kemppi
35
1921390 / 2310

Kemppi Flexlite GX Series Specifications

General

Brand	Kemppi
Model	Flexlite GX Series
Category	Welding Accessories
Language	English