EN
Welding software delivery prole
KempArc Pulse is designed to allow customer specied welding software choice. Following
delivery and installation your machine will include welding software specied at the point
of order. Detailed in the table below are typical welding curves available. If the delivery
specication is focused to a specic project and you wish to up-date the machine in future,
you can select additional welding software from the Wise and Match software menu. Order
and load these software products to your machine with Kemppi DataGun eld program
device.
Wise and Match products provide optional welding application solutions. Wise and Match
products menu includes special weld process for (1) root pass and (2) thin plate welding, (3)
auto power regulation and (4) arc length recognition, (5) system lock function, plus additional
base material curves and optional panel function. With Wise and Match you can turn
something special into something unique.
1. WiseRoot – A
9991011
2. WiseThin – A
9991013
3. WisePenetration – A
9991010
4. WiseFusion – A
9991015
WORK PACK. The welding table below details Work Pack delivery option. Additional welding
software products can be purchased and added later if required.
Group N:o Pulse 1-MIG Wire ø mm Material Gas
Alu A01 X X 1 AlMg5/AlMgMn Ar
Alu A02 X X 1.2 AlMg5/AlMgMn Ar
Alu A12 X X 1.2 AlSi5/AlSi12 Ar
Fe F03 X X 1 Fe Ar+18–25%CO
Fe F04 X X 1.2 Fe Ar+18–25%CO
Ss S03 X X 1 Ss-316/308 Ar+2%CO
Ss S04 X X 1.2 Ss-316/308 Ar+2%CO
Ss S06 X 1 Ss-316/308 Ar+2%CO
Fe R04 X 1.2 FeFC_Rut Ar+18–25%CO
Fe M04 X 1.2 FeMC Ar+18–25%CO
Ss S84 X 1.2 FC-316 Ar+25%CO
Additional welding curves available. Further welding curves are available upon request
through Kemppi Match products system.
Group N:o Pulse 1-MIG Wire ø mm Material Gas
Alu A13 X X 1.6 AlSi5/AlSi12 Ar
Fe F01 X X 0.8 Fe Ar+18–25%CO
Fe F02 X X 0.9 Fe Ar+18–25%CO
Ss S73 X 1 Inc625/SMO Ar+He+CO
17
KempArc Pulse 350, 450 / © Kemppi Oy / 1044
To Next Page
Loading...
Need help?
General
