Kemppi KempArc Pulse 350 - Before Use; 2 Installation; Machine Introduction

EN
2. INSTALLATION
2.1 BEFORE USE
The product is packed in specially designed transport cartons. However, before use always
make sure the products have not been damaged during transportation.
Product packaging material is recyclable.
NOTE! When moving the welding machine, always lift it from the handle, never pull it from the
welding gun or other cables.
Operating environment
This machine is suitable for both indoor and outdoor use. Always make sure that the air ow
to the machine is unrestricted. The recommended operating temperature range is -20…
+40°C.
Please ensure you read the safety instructions concerning operating environments supplied in
this manual.
2.2 MACHINE INTRODUCTION
6,3A
1.
2.
3.
4.
8.
10.
11. 12. 13. 14.
5.
7.
9.
6.
4
KempArc Pulse 350, 450 / © Kemppi Oy / 1044