Kemppi Master M 205 User Manual

Master M 205, 323
Operating manual - EN
2.3 Installing equipment on cart (optional)
Master M has two transport unit options: a 2-wheel cart with a gas bottle rack (T22M) and a 2-wheel cart without a gas
bottle rack (T32A).
You can install the Master M device on the T22M cart with or without the cooling unit. Do not install the cooling unit
on the T32A cart. Otherwise the bottom securing interface is the same with both carts.
The maximum recommended size of the gas bottle to be installed on the T22M cart is 20 liters.
Tools needed:
To install the Master M device on the T22M cart:
1. Install the Master M device on the cart.
© Kemppi
13
1922130 / 2313

Kemppi Master M 205 Specifications

General

Brand	Kemppi
Model	Master M 205
Category	Welding System
Language	English