Master M 205, 323
Operating manual - EN
1. GENERAL
These instructions describe the use of Kemppi's Master M 205 and 323 welding machines designed for light- to medium-
duty professional use in MIG/MAG welding.
Master M 205 and 323 welding machines include both manual and automatic welding processes. Pulse welding is pos-
sible with the Master M 205 machine (220...240 V).
Master M is designed to be used together with Kemppi's Flexlite GX MIG welding guns with euro connector.
Master M can be used also for TIG * and MMA ** welding.
* TIG welding requires the use of a dedicated Flexlite TX TIG torch with euro connector.
** MMAwelding requires a dedicated DIX-euro adapter.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-
tion to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the
below symbols. Read these sections carefully and follow their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.
Kemppi symbols: Userdoc.
DISCLAIMER
While every effort has been made to ensure that the information contained in this guide is accurate and com-
plete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the spe-
cification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit
the contents of this guide without prior permission from Kemppi.
© Kemppi
4
1922130 / 2313
To Next Page
Loading...
Need help?
General
