Master M 205, 323
Operating manual - EN
CONTENTS
1. General 4
1.1 Equipment description 5
1.2 Master M 205 and 323 devices 6
1.2.1 Wire feed mechanism 7
1.3 Master Cooler 05M cooling unit (optional) 8
2. Installation 9
2.1 Installing power source mains plug 10
2.2 Installing cooling unit (optional) 11
2.3 Installing equipment on cart (optional) 13
2.4 Connecting welding gun 17
2.5 Connecting earth return cable 18
2.6 Installing and changing wire (200 mm spool) 19
2.7 Installing and changing wire (100 mm spool) 24
2.8 Installing and replacing feed rolls 26
2.9 Installing and replacing wire guide tubes 28
2.10 Installing gas bottle and testing gas flow 29
3. Operation 31
3.1 Preparing welding system for use 32
3.1.1 Preparing cooler 33
3.2 Calibrating welding cable 35
3.3 Using control panel 36
3.3.1 Control panel: Main view 37
3.3.2 Control panel: Memory channels 39
3.3.3 Control panel: Welding process 39
3.3.4 Control panel: Trigger logic 40
3.3.5 Control panel: Weld Assist 41
3.3.6 Control panel: Welding parameters 42
3.3.7 Control panel: System settings 44
3.3.8 Control panel: Weld data 45
3.4 Additional guidance to functions and features 47
3.4.1 1-MIG 47
3.4.2 Pulse welding 47
3.4.3 MAX Cool process 47
3.4.4 Trigger logic functions 48
3.5 Changing welding polarity 49
3.6 Lifting Master M equipment 51
4. Maintenance 53
© Kemppi
2
1922130 / 2313
To Next Page
Loading...
Need help?
General
