Kemppi Master M 205 User Manual

Master M 205, 323
Operating manual - EN
3.1.1 Preparing cooler
To fill the cooler:
Fill the cooler with 20-40 % coolant solution, for example, Kemppi cooling liquid.
1. Open the cooler cap.
2. Fill the cooler with coolant. Do not fill over the max. marking.
3. Close the cooler cap.
To bleed the cooler:
1. Connect the bleeding hose included in the Master M delivery package to the coolant outlet connector.
2. Place a container under the other end of the hose to collect coolant coming from the cooler.
3. Push the cooling liquid circulation button until coolant starts to come out of the hose.
4. Release the cooling liquid circulation button and remove the bleeding hose.
5. Connect the welding gun as instructed in section "Connecting welding gun" on page17.
© Kemppi
33
1922130 / 2313

Kemppi Master M 205 Specifications

General

Brand	Kemppi
Model	Master M 205
Category	Welding System
Language	English