Kemppi Master M 205 User Manual

Master M 205, 323
Operating manual - EN
2. If needed, adjust the spool braking force by turning the spool hub fastener.
To install the filler wire:
1. Release the filler wire end from the spool and cut off any deformed section so that the end is straight.
Ensure that the filler wire does not spill from the spool when it is released.
2. File the tip of the filler wire smooth.
Sharp edges on the filler wire tip may damage the wire liner.
© Kemppi
20
1922130 / 2313

Kemppi Master M 205 Specifications

General

Brand	Kemppi
Model	Master M 205
Category	Welding System
Language	English