Kemppi MasterTig 235ACDC GM - Power Source and Basic Operation

MasterTig 235ACDC, 325DC, 335ACDC
Operating manual - EN
3.1 Operating power source
1. Turn the power source ON. The power switch is located in the rear.
2. Depending on your control panel type, wait approximately 15 seconds for the system to start up.
For control panel operation, refer to:
• "Operating control panels MTP23X and MTP33X" on page27
• "Operating control panel MTP35X" on page35
© Kemppi
26/77 1920900 / 1939