Kemppi MasterTig 235ACDC GM User Manual

MasterTig 235ACDC, 325DC, 335ACDC
Operating manual - EN
3.5 Remote control
For installing remote control, refer to "Installing remote control" on page18.
Hand remote control:
To adjust the welding current, turn the knob on the remote control.
Tip: The remote control comes equipped with a handy clip for hanging the remote onto your belt.
Foot pedal remote control:
To adjust the welding current, press the pedal.
Tip: To shift the foot pedal position on the floor, use the foot pedal handle.
© Kemppi
53/77 1920900 / 1939

Kemppi MasterTig 235ACDC GM Specifications

General

Brand	Kemppi
Model	MasterTig 235ACDC GM
Category	Welding System
Language	English